Shenzhen Homay Water Technology Development Limited

The purpose of UV light is for bacterial disinfecting. However, on a Water Ionizer this is completely unnecessary for several reasons. If you have city (municipal) water then your water has already been disinfected through the use of chlorine. The carbon filter on the Water Ionizer will remove the chlorine. The UV light itself loses much of its effectiveness after the first six months of use and should be replaced often, which is of course an expensive proposition. Also, the glass tube that the water travels through in order that it can be exposed to the UV light develops a film on it after only a few months, which greatly lessens the effectiveness of the UV light on the water which passes through the tube. Most manufacturing industries use slow running water with long UV tubes, so it is questionable as to how effective a Small UV tube over faster running water is ? This is not logical.

The electrode cathodes are one of the most important components of a Water Ionizer. It is sometimes suggested that there are units on the market that have stainless steel electrodes cathode and this simply is not the case. All Water Ionizers currently manufactured from here have titanium electrodes cathode with platinum tips, which is one of the largest costs of a Water Ionizer.

All home Water Ionizers currently manufactured deliver approximately 1 to 1-1/2 gallons per minute. There is very little difference between the strength of the various Water Ionizers on the market. Ionized Water with a pH of 10 or higher has only an unflattering taste, almost as though it is salty. Normally, the slower you run water through a Water Ionizer, the stronger it will become because the source water has more contact time with the electrodes. This is why the flow rate of Water Ionizers essentially does not matter. If you wish to drink strong Ionized Water then running the source water through it very slowly will accomplish a stronger ionized water. But our water ionizer can be constant outlet for ORP as you needs, the water flow rate of your water source is same result of our water ionizer.

Water is run over positive and negative electrodes, which ionizes the water. It accomplishes this by electrically "charging" the water into positive and negative ions. And the positive ions of water will run over to negative electrode become alkaline water (alkaline water use the ORP meter will get the negative charge of ORP). The negative ions of water will run over to positive electrode become acidic water.